Lets see... I left Galliot and headed up to Staniels Cay for some fuel
The next morning asa I was trying to drop the mooring I under estimated the speed of the tidal current and in motoring to avoid the boat behind me I got the line wrapped in the prop and the engine stalled and in doing that it bent the shaft and broke the strut. I managed to anchor in 20+ feet of water with about 150 feet of chain and rode out but the Bruce anchor bit well and I got the boat under control with only a minor chain rope burn and lightly smushed finger. After I calmed down a bit I dove under the boat to cut the painter and free the dingy. There was only a couple inches of line left to the dingy when it was free and the prop must have missed it by inches.
We were going to wait two days for the seas to settle out in the sound but decided to leave early and it was a good thing we did. The waves were still big and winds gusty to 28 knots. But the sail over to Ship Channel Cay went well and after several tacks I made it up into the lee to anchor without resorting to my hurt drive line. The next morning I sailed out again but 5 miles out the winds died and Bill and Karen on Island Moon towed met the rest of the 30 miles into Nassau wher I very carefully motored into a slip at Nassau Hrabour Club to wait for the boatyard to lift me out.
After I hauled I discovered the bend in the shaft and the extent of the break... So here I am in an airport with a new shaft and with any luck I should be floating by the weekend...
Life is an Adventure
To be continued...
Thanks for the photos and explanation. Phil has been wondering and wondering how that happened. Good luck and hope the fix goes smoothly. We miss you.
ReplyDeleteLorraine and Phil